Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium

Amirhasan Behrouzi; Seyyed Reza Talebiyan

doi:doi:10.11648/j.jeee.s.2015030201.32

| Peer-Reviewed

Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium

Amirhasan Behrouzi, Seyyed Reza Talebiyan

Published in Journal of Electrical and Electronic Engineering (Volume 3, Issue 2-1)

Received: 18 November 2016 Accepted: 21 November 2016 Published: 8 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.

Published in	Journal of Electrical and Electronic Engineering (Volume 3, Issue 2-1) This article belongs to the Special Issue Research and Practices in Electrical and Electronic Engineering in Developing Countries
DOI	10.11648/j.jeee.s.2015030201.32
Page(s)	107-110
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Thin Film Solar Cell, Cadmium, Multilayer, Thickness Analysis

References

[1]	http:// www. Renewableener gyworld. Com/ rea/ news/ article/ 2011/01/ how- thin- film- solar- will- farc- against- crystalline- silicons- shallenge.
[2]	S. Khosroabadi, and S. H. Keshmiri, “Design of a high efficiency ultrathin CdS/CdTe solar cell using back surface field and backside distributed Bragg reflector,” Opt. Express. 22, A921-A929 (2014).
[3]	N. Amin, K. Sopianb, and M. Konagai, “Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness,” Sol. Energ. Mat. Sol. C. 91(13), 1202–1208 (2007).
[4]	L. V. Krishnakumar, J. Han, A. Klein, and W. Jaegermann, “CdTe thin film solar cells with reduced CdS film thickness,” Thin Solid Films 519(7), 7138–7141 (2011).
[5]	M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, “Solar cell efficiency tables (Version38),” Prog. Photovoltaics Res. Appl. 19(5), 84–92 (2011).
[6]	E. Colegrove, R. Banai, C. Blissett, C. Buurma, J. Ellsworth, M. Morley, S. Barnes, et al., “High-Efficiency Polycrystalline CdS/CdTe Solar Cells on Buffered Commercial TCO-Coated Glass,” J. Electron. Mater. 41(10), 2833–2837 (2012).
[7]	http:// www. Firstsolar. Com/ en/ Innovation/ Advanced – Thin- film- Modules, 2014.
[8]	I. P. Lemmon, E. Polikarpov, W. D. Bennett, and L. Kovarik, ""Thin metal oxide films to modify a window layer in CdTe- Based solar cells For improved performancc,""Applied physics letter, vol, 100-, pp, 1-4, 2012.
[9]	T. Aramoto, S. Kumazawa, H. Higuchi, T. Arita, S. Shibutani, T. Nishio, et al., ""16.0 Efficient Thin-Film CdS/CdTe Solar Cells,"" Jpn. J. Appl. Phys, vol. 36, pp 1997. 6304-6305.
[10]	S. Khosroabadi, and S. H. Keshmiri Design of a high efficiency CdS/CdTe solar cell with optimized step doping, film thickness, and carrier lifetime of the absorption layer. J. Europ. Opt. Soc. Rap. Public. 9, 14052 2014.
[11]	T. A. Gessert A. Dude, S. Ashaer, C. Narayanswamy, and D. Rose, in Proc.28th IEEE Photovoltaic Specialist Conf 654-657, 2000.

Cite This Article

Plain Text BibTeX RIS

APA Style

Amirhasan Behrouzi, Seyyed Reza Talebiyan. (2016). Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. Journal of Electrical and Electronic Engineering, 3(2-1), 107-110. https://doi.org/10.11648/j.jeee.s.2015030201.32

Copy | Download

ACS Style

Amirhasan Behrouzi; Seyyed Reza Talebiyan. Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. J. Electr. Electron. Eng. 2016, 3(2-1), 107-110. doi: 10.11648/j.jeee.s.2015030201.32

Copy | Download

AMA Style

Amirhasan Behrouzi, Seyyed Reza Talebiyan. Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. J Electr Electron Eng. 2016;3(2-1):107-110. doi: 10.11648/j.jeee.s.2015030201.32

Copy | Download

@article{10.11648/j.jeee.s.2015030201.32,
  author = {Amirhasan Behrouzi and Seyyed Reza Talebiyan},
  title = {Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {3},
  number = {2-1},
  pages = {107-110},
  doi = {10.11648/j.jeee.s.2015030201.32},
  url = {https://doi.org/10.11648/j.jeee.s.2015030201.32},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.s.2015030201.32},
  abstract = {Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium
AU  - Amirhasan Behrouzi
AU  - Seyyed Reza Talebiyan
Y1  - 2016/12/08
PY  - 2016
N1  - https://doi.org/10.11648/j.jeee.s.2015030201.32
DO  - 10.11648/j.jeee.s.2015030201.32
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 107
EP  - 110
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.s.2015030201.32
AB  - Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.
VL  - 3
IS  - 2-1
ER  -

Copy | Download

Author Information

Amirhasan Behrouzi

Department of Electronic Engineering, Khorasan-e-Razavi Science and Research Branch, Islamic Azad University, Neyshabur, Iran
Seyyed Reza Talebiyan

Department of Electronic Engineering, Khorasan-e-Razavi Science and Research Branch, Islamic Azad University, Neyshabur, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Amirhasan Behrouzi, Seyyed Reza Talebiyan. (2016). Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. Journal of Electrical and Electronic Engineering, 3(2-1), 107-110. https://doi.org/10.11648/j.jeee.s.2015030201.32

Copy | Download

ACS Style

Amirhasan Behrouzi; Seyyed Reza Talebiyan. Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. J. Electr. Electron. Eng. 2016, 3(2-1), 107-110. doi: 10.11648/j.jeee.s.2015030201.32

Copy | Download

AMA Style

Amirhasan Behrouzi, Seyyed Reza Talebiyan. Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium. J Electr Electron Eng. 2016;3(2-1):107-110. doi: 10.11648/j.jeee.s.2015030201.32

Copy | Download

@article{10.11648/j.jeee.s.2015030201.32,
  author = {Amirhasan Behrouzi and Seyyed Reza Talebiyan},
  title = {Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium},
  journal = {Journal of Electrical and Electronic Engineering},
  volume = {3},
  number = {2-1},
  pages = {107-110},
  doi = {10.11648/j.jeee.s.2015030201.32},
  url = {https://doi.org/10.11648/j.jeee.s.2015030201.32},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.s.2015030201.32},
  abstract = {Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Thickness Simulation and Analysis of CdS/CdTe Solar Cell to Increase the Efficiency and Decrease the Toxicant Material of Cadmium
AU  - Amirhasan Behrouzi
AU  - Seyyed Reza Talebiyan
Y1  - 2016/12/08
PY  - 2016
N1  - https://doi.org/10.11648/j.jeee.s.2015030201.32
DO  - 10.11648/j.jeee.s.2015030201.32
T2  - Journal of Electrical and Electronic Engineering
JF  - Journal of Electrical and Electronic Engineering
JO  - Journal of Electrical and Electronic Engineering
SP  - 107
EP  - 110
PB  - Science Publishing Group
SN  - 2329-1605
UR  - https://doi.org/10.11648/j.jeee.s.2015030201.32
AB  - Population growth as well as the growth in energy demand is one of the most challenging problems in the world. Therefore, there is great need of green energy technologies and one of the green energy resources is solar cell that converts sun rays in a photovoltaic way into electrical energy. Firstly, we have presented a structure and after simulating this structure and reaching to approximately close results we expect any improvement in simulated model can be accessible in manufactured model. In this article, synchronous analysis of layer thickness for reaching to the maximum efficiency has been done. Our analysis performs to maximize the efficiency and minimize the thickness of layers with toxicant and expensive cd material. The results, shows increase of the efficiency and extreme decreasing in Cd layers thickness.
VL  - 3
IS  - 2-1
ER  -

Copy | Download